Screw Type Industrial Chiller
  • Screw Type Industrial Chiller - 0 Screw Type Industrial Chiller - 0
  • Screw Type Industrial Chiller - 1 Screw Type Industrial Chiller - 1
  • Screw Type Industrial Chiller - 2 Screw Type Industrial Chiller - 2
  • Screw Type Industrial Chiller - 3 Screw Type Industrial Chiller - 3

Screw Type Industrial Chiller

Aumax Screw Type Industrial Water Chiller equipped with half-closed high deficiency screw type compressor and micro-computer with touch screen control system. Because the chiller adopts advanced production technology for design and production, the overall failure rate is low. Even if the chiller is used uninterruptedly for a long time, the chiller will not cause many failures. The fewer the failures caused by the chiller, the higher the safety factor for the company to use the chiller, thereby providing technical guarantees for extending the service life of the equipment. AMC-W Series Water-cooled screw type industrial chiller machines are mainly used in plastic injection molding industry for cooling of injection mold and hydraulic systems, and also they are widely used in industries of electroplate, laser, chemical industry , food, pharmaceutical medical etc.

Send Inquiry

Product Description

Screw Type Industrial Chiller

 

1. Screw Type Industrial Chiller Introduction


Aumax Screw Type Industrial Water Chiller equipped with half-closed high deficiency screw type compressor and micro-computer with touch screen control system. Because the chiller adopts advanced production technology for design and production, the overall failure rate is low. Even if the chiller is used uninterruptedly for a long time, the chiller will not cause many failures. The fewer the failures caused by the chiller, the higher the safety factor for the company to use the chiller, thereby providing technical guarantees for extending the service life of the equipment. AMC-W Series Water-cooled Industrial Screw Chiller Machines are mainly used in plastic injection molding industry for cooling of injection mold and hydraulic systems, and also they are widely used in industries of electroplate, laser, chemical industry , food, pharmaceutical medical etc.

 

2.Screw Type Industrial Chiller Parameter (Specifications)


Model

AMC-50W

AMC-60W

AMC-70W

AMC-80W

AMC-90W

AMC-110W

AMC-125W

AMC-140W

AMC-180W

AMC-210W

Chilling

Capacity

kw

132

165

195

225

260

320

365

420

550

630

Kcal/h

113500

142000

166000

192000

205000

273000

313000

360500

469000

512000

Compressor

HP

50

60

70

80

90

110

125

140

180

210

Refrigerant

R22 / R407C

Condenser

High-efficient Tube-in Shell Type HeatEx-changer

Chilling Water

m³/h

30

37

45

50

60

72

82

95

125

140

Pipe Joint Size

3”

4”

4”

4”

5”

5”

5”

5”

6”

6”

Evaporator

High-efficient Tube-in Shell Type Heat Ex-changer

Chilled Water

m³/h

25

30

35

40

45

55

65

75

95

110

Pipe Joint Size

3”

4”

4”

4”

4”

4”

4”

4”

5”

5”

Dimensions:

 

L

mm

2180

2200

2250

2860

2860

2980

3000

2010

3150

3950

W

mm

950

950

950

1700

1050

1050

1050

1060

1110

1150

H

mm

1430

1500

1660

1700

1700

1970

1980

1990

2150

2160

Please excuse for not note if some specifications of products are changed!

Note:

1) Condition for parameter test: temperature of chilled water: inlet 12°C,outlet 7°C;temperature of chilling water: Inlet 30°C, outlet 35°C. 

2) Noise test: 1m away from the due front of the machine, 1.5m high away from the machine(noise: below 30dB) 

3) Any special requirements, have to be advised before order. 

4) The standard power supply is 3Ø, 380V, 50HZ. Other power supply is available

 

3.Screw Type Industrial Chiller Features & Application



1. The screw type industrial water chiller uses a PLC program controller which is equipped with a large-screen touch screen, which can facilitate the operation of the operator. At the same time, the simple interface is easier to accept, and it is not prone to operating errors.

2. The protection function of the screw chiller is very reliable, so there is no need to worry about the safety of the staff.

3. Zero-cost, energy-saving and high-efficiency: The investment and profit of the air-cooled screw chiller can be recycled when making hot water, achieving a zero-cost effect, saving more energy for the enterprise and providing more energy efficiency.

4. Fully automatic computer control is not only convenient for operation, but also saves more manpower and financial resources, and avoids misoperation. Moreover, the control method can be controlled remotely, which can also ensure the safety of the staff.

5. It can be installed flexibly on the roof, terrace, and computer room

6. In response to the call for environmental protection, the air-cooled screw chiller uses refrigerant as the medium, which has no explosion hazard and no toxic gas emissions. It can also be used with a solar system, which has strong environmental protection capabilities and saves energy.

 

4. Screw Type Industrial Chiller Qualification


Aumax Plast has been focusing on R&D and manufacturing of plastic recycling machine and auxiliary equipment for injection molding machine, blowing molding machine and plastic extrusion line for more than 15years.

 

We have obtained various domestic and foreign certifications such as IS09001, ISO14001, CE, etc., which fully demonstrates that our products fully comply with international standards and the quality of products is guaranteed.


 

5. Delivery, Shipping and Serving


Normally, the delivery time of our plastic machines is 10-20 days after order confirmed and advance payment. Most of our products are packed in plywood cases. For small machines like Vacuum Autoloaders are packed in corrugated case. Usually, we ship large machines by LCL or FCL ocean shipping. Sometimes, customers need machine urgently, we ship machine by air or express.


 

6. FAQ


1. Q: What is the MOQ?

A: The MOQ is 1 set for all products..

 

2. Q: Where is the loading port?

A: The nearest port to our factory is port of Ningbo, China, as well as we can send machine to Yiwu, Shanghai, Guangdong or any other cities in China.

 

3. Q: What are the payment terms?

A: The preferential payment term is T/T, while other payment terms are negotiable.

 

4. Q: What are your terms of delivery?

A: We accept FOB, CFR, CIF, EXW, and DDU. You can choose the terms which is the most convenient and cost effective to you.

 

5. Q: How does your factory carry out quality control?

A: Powerful R&D teams and professional QC department take care of every detail during design, processing, assembling, testing and packing.

 

6. Q: Can you supply OEM and customized products?

A: Yes, we can supply OEM / ODM service. Our engineers have rich experience in design and production of plastic auxiliary equipment. We can supply special products according to your ideas and drawings.

 

7. Q: What about warranty terms?

A: We provide one year warranty for all of our products. During warranty period, if any machine parts damaged due to quality, we will send the new parts by courier immediately by free of charge. Also, we supply 24 hours online service and technical support.

 

 


Hot Tags: Screw Type Industrial Chiller, Manufacturers, Suppliers, Factory, Customized, China, Quality, CE, Advanced, Buy, Price

Related Category

Send Inquiry

Please feel free to give your inquiry in the form below. We will reply you within 24 hours.

Related Products